this is information on a product in full production. october 2012 doc id 018925 rev 1 1/8 8 STTH30L06-Y automotive turbo 2 ultrafast high voltage rectifier datasheet ? production data features aec-q101 qualified ultrafast switching low reverse current low thermal resistance reduces switching and conduction losses ecopack ? 2 compliant component (do-247) description the stth30l06 uses st turbo 2 600 v technology and is especially suited for use in rectification and discontinuous mode pfc boost diode for automotive applications. table 1. device summary i f(av) 30 a v rrm 600 v t j 175 c v f (typ) 1.10 v t rr (max) 65 ns k a a k a d 2 pak stth30l06gy do-247 stth30l06wy www.st.com
characteristics STTH30L06-Y 2/8 doc id 018925 rev 1 1 characteristics to evaluate the conduction losses use the following equation: p = 0.95 x i f(av) + 0.010 i f 2 (rms) table 2. absolute ratings (limiting values) symbol parameter value unit v rrm repetitive peak reverse voltage 600 v i f(rms) forward rms voltage 50 a i f(av) average forward current t c = 125 c ? = 0.530a i fsm surge non repetitive forward current t p = 10 ms sinusoidal 300 a t stg storage temperature range -65 to +175 c t j operating junction temperature range -40 to +175 c table 3. thermal resistance symbol parameter value (max) unit r th(j-c) junction to case 1.1 c/w table 4. static electrical characteristics symbol parameter test conditions min. typ. max. unit i r (1) reverse leakage current t j = 25 c v r = v rrm 25 a t j = 150 c 80 800 v f (2) forward voltage drop t j = 25 c i f = 30 a 1.55 v t j = 150 c 1.0 1.25 1. pulse test: t p = 5 ms, ? < 2% 2. pulse test: t p = 380 s, ? < 2% table 5. dynamic characteristics symbol parameter test conditions min. typ. max. unit t rr reverse recovery time t j = 25 c i f = 0.5 a, i rr = 0.25 a, i r =1 a 65 ns i f = 1 a, di f /dt = 50 a/s, v r =30 v 65 90 i rm reverse recovery current t j = 125 c i f = 30 a, v r = 400 v, di f /dt = 100 a/s 11.5 16 a t fr forward recovery time t j = 25 c i f = 30 a, di f /dt = 100 a/s, v fr = 1.1 x v fmax 500 ns v fp forward recovery voltage t j = 25 c i f = 30 a, di f /dt = 100 a/s, v fr = 1.1 x v fmax 2.5 v
STTH30L06-Y characteristics doc id 018925 rev 1 3/8 figure 1. conduction losses versus average forward current figure 2. forward voltage drop versus forward current p(w) 0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 t =tp/t tp i (a) f(av) = 1 = 0.05 = 0.1 = 0.2 = 0.5 0 10 20 30 40 50 60 70 80 90 100 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 i (a) fm v (v) fm t =150c (typical values) j t =25c (maximum values) j t =150c (maximum values) j figure 3. relative variation of thermal impedance junction to case versus pulse duration figure 4. peak reverse recovery current versus di f /dt (typical values) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-03 1.e-02 1.e-01 1.e+00 z/r th(j-c) th(j-c) t (s) p single pulse 0 5 10 15 20 25 30 35 40 45 0 50 100 150 200 250 300 350 400 450 500 i (a) rm di /dt(a/s) f i =2 x i f f(av) i=i f f(av) i =0.5 x i f f(av) v =400v t =125c r j figure 5. reverse recovery time versus di f /dt (typical values) figure 6. reverse recovery charges versus di f /dt (typical values) 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 0 50 100 150 200 250 300 350 400 450 500 t (ns) rr di /dt(a/s) f i=i f f(av) i =0.5 x i f f(av) v =400v t =125c r j i =2 x i f f(av) 0 500 1000 1500 2000 2500 3000 3500 0 100 200 300 400 500 q (nc) rr i =2 x i f f(av) i=i f f(av) i =0.5 x i f f(av) v =400v t =125c r j di /dt(a/s) f
characteristics STTH30L06-Y 4/8 doc id 018925 rev 1 figure 7. reverse recovery softness factor versus di f /dt (typical values) figure 8. relative variations of dynamic parameters versus junction temperature 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 50 100 150 200 250 300 350 400 450 500 s factor i < 2 x i t =125c f f(av) j v =400v r di /dt(a/s) f 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 25 50 75 100 125 i rm q rr t rr s factor t (c) j i=i reference: t =125c f f(av) j v =400v r figure 9. transient peak forward voltage versus di f /dt (typical values) figure 10. forward recovery time versus di f /dt (typical values) 0 1 2 3 4 5 6 7 8 9 10 0 50 100 150 200 250 300 350 400 450 500 v (v) fp di /dt(a/s) f i=i t =125c f f(av) j 0 50 100 150 200 250 300 350 400 450 500 0 100 200 300 400 500 t (ns) fr di /dt(a/s) f d pak 2 i=i t =125c f f(av) j v =1.1 x v max. fr f figure 11. junction capacitance versus reverse voltage applied (typical values) figure 12. thermal resistance junction to ambient versus copper surface under tab 10 100 1000 1 10 100 1000 c(pf) v (v) r f=1mhz v =30mv t =25c osc rms j r (c/w) th(j-a) 0 10 20 30 40 50 60 70 80 0 5 10 15 20 25 30 35 40 s (cm2) cu epoxy printed circuit board fr4, copper thickness = 35 m
STTH30L06-Y package information doc id 018925 rev 1 5/8 2 package information epoxy meets ul94, v0 cooling method: by conduction (c) in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 13. d 2 pak footprint (dimensions in mm) table 6. d 2 pak dimensions ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 a1 2.49 2.69 0.098 0.106 a2 0.03 0.23 0.001 0.009 b 0.70 0.93 0.027 0.037 b2 1.14 1.70 0.045 0.067 c 0.45 0.60 0.017 0.024 c2 1.23 1.36 0.048 0.054 d 8.95 9.35 0.352 0.368 e 10.00 10.40 0.393 0.409 g 4.88 5.28 0.192 0.208 l 15.00 15.85 0.590 0.624 l2 1.27 1.40 0.050 0.055 l3 1.40 1.75 0.055 0.069 m 2.40 3.20 0.094 0.126 r 0.40 typ. 0.016 typ. v2 0 8 0 8 g l l3 l2 b b2 e * flat zone no less than 2mm a c2 d r a2 m v2 c a1 * 16.90 10.30 8.90 3.70 5.08 1.30
package information STTH30L06-Y 6/8 doc id 018925 rev 1 table 7. do-247 dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 4.85 5.15 0.191 0.203 d 2.20 2.60 0.086 0.102 e 0.40 0.80 0.015 0.031 f 1.00 1.40 0.039 0.055 f2 2.00 0.078 f3 2.00 2.40 0.078 0.094 g 10.90 0.429 h 15.45 15.75 0.608 0.620 l 19.85 20.15 0.781 0.793 l1 3.70 4.30 0.145 0.169 l2 18.50 0.728 l3 14.20 14.80 0.559 0.582 l4 34.60 1.362 l5 5.50 0.216 m 2.00 3.00 0.078 0.118 v5 5 v2 60 60 dia. 3.55 3.65 0.139 0.143 f2 v2 l4 l2 l1 l3 d l l5 me h v v a dia. f3 g f
STTH30L06-Y ordering information doc id 018925 rev 1 7/8 3 ordering information 4 revision history table 8. ordering information order code marking package weight base qty delivery mode stth30l06gy-tr stth30l06gy d 2 pak 1.48 g 1000 tape and reel stth30l06wy stth30l06wy do-247 4.40 g 30 tube table 9. document revision history date revision changes 24-oct-2012 1 first issue.
STTH30L06-Y 8/8 doc id 018925 rev 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
